Dunning Program

Running the Dunning Program

Objectives

After completing this lesson, you will be able to:
  • Modify the dunning program parameters
  • Execute a dunning run
  • Edit a dunning proposal
  • Print a dunning notice

Dunning Program Parameters

Visualizes the flow of dunning program parameters, linking account data input to document generation for streamlined financial processing.

After configuring the dunning program, you need to execute the program. To execute the program, you must follow a sequence of steps. The first step is to enter the parameters. The parameters provide information about the dunning run. You can copy the parameters from existing dunning runs.

Specify the following parameters to identify the dunning run:

  • Run date

    Identifies the program run.

    Note

    The run date does not have to be the date when the system executes the program, but it is recommended that it is.
  • Identification

    Differentiates between programs with the same run date.

Open Item Selection

Graphic illustrating organizational steps for selecting company codes, accounts, and documents during a business or data management process.

You use the parameters to specify which company codes, documents, and accounts the system searches for overdue items.

You can activate an additional log to check whether the dunning run was successful. You should only use this log for testing and training purposes, because depending on the number of open items, it can use a lot of system resources.

Modify Dunning Program Parameters

Dunning Run

Illustration of a dunning run process, showing accounts feeding into scheduled actions to generate documents, conveying automation in financial account management tasks.

The dunning run creates a dunning proposal which you can edit, delete, and re-create as often as you need to.

You can automatically print the dunning notices directly after the dunning run, but in this case, you cannot edit the dunning proposal.

Steps in the Dunning Run

Visualizing a step-by-step process for managing overdue accounts, highlighting account selection, line item review, and account-specific dunning procedures.

The dunning run is made up of three main steps:

  1. Account selection

    In this step, the program checks which accounts will be considered in the dunning run according to the parameters and the configuration.

  2. Dun line items

    In this step, the system checks which line items are overdue in the selected accounts and which dunning level needs to be applied.

  3. Dun Account

    In this step, the system checks whether the payments have to be dunned for an account. If the answer is yes, then the system checks which dunning level must be used.

Account Selection

Flowchart illustrating the dunning process, highlighting how accounts are selected or excluded for follow-up based on time intervals since the last dunning activity.

The account selection is the first step in the dunning run. The program checks all the accounts using the criteria entered in the parameters.

To be considered in the dunning run, the accounts must fulfill the following criteria:

  • A dunning procedure is entered in the master data.
  • The date of the last dunning run for the account is before the dunning interval date of the dunning procedure.

If the accounts fulfill these criteria, the system includes them in the dunning run. Otherwise, the system ignores them.

Due Dates for Receivables and Credit Memos

Illustration emphasizing timelines for receivables and credit memos, highlighting not due periods, due date milestones, and overdue phases to manage payment deadlines effectively.

The due date is the date by which the customer has to pay the net liabilities.

The following rules apply to due dates for receivables and credit memos:

  • Receivables

    Due by the due date for the net payment.

  • Invoice-related credit memos

    Due on the same date as the invoice. Usually, the payment terms of a credit memo do not apply. If you want to apply the payment terms in a credit memo, enter V in the Invoice Reference field.

  • Other credit memos (without "V" in Invoice Reference)

    Due at the baseline date.

Clearing with Credit Memos and Vendor Items

Illustration showing credit memo and vendor item clearing processes, balancing transactions to finalize net amounts. Includes steps for issuing dunning letters based on debit balances.

When clearing with credit memos, the due net debit items on the account are cleared with the due net credit items. The system assigns the credit items to the debit items with the highest dunning level and clears them.

If you selected Clearing between the customer and the vendor, the due net credit items in the vendor account are also cleared with the items with the highest dunning level. The same dunning procedure must be defined for both the customer and vendor.

After clearing all the due debit items with the due net credit items, the account must have a debit balance for the system to dun it. However, if you set the Dunning Letter Even if Account Balance Is Positive flag in Customizing, the system ignores this check and creates dunning letters, regardless of the account balance.

Note

The overdue items for each dunning notice must have a debit balance, otherwise, the system does not generate a dunning notice. The dunning notice lists all the cleared items.

Dunning Dates

Comparison of dunning timelines: Without grace periods, dunning starts immediately; with grace periods, a delay is added before dunning begins, providing extra flexibility for payments.

The difference between the due date and the dunning date is the following:

  • Due date

    The day by which the liabilities must be paid.

  • Dunning date

    The day when the overdue items are dunned.

Every dunned item is overdue, but not all overdue items are dunned. Usually, all the overdue items at the date of issue have to be dunned.

By defining Line item grace periods in the dunning procedure, the system only duns the items that are still overdue after deducting the grace days.

Dunning Block in Items or Accounts

Illustrates the concept of preventing dunning processes through account or item-level blocks, emphasizing restrictions and categorized lists for better financial control.

Dunning blocks enable you to prevent an account or an item from being dunned. If items are overdue, but there is a dunning block in the item, the system adds these items to the blocked items list.

If payments have to be dunned for an account, but the account contains a dunning block, the system adds the account to the list of blocked accounts.

Payment Method for an Item or Account

Flowchart illustrating decision-making for dunning based on payment method and item/account status, emphasizing conditions for action or withholding dunning.

If a payment method is specified for an item or for a customer account (in the master data), the system will not usually dun incoming payments. Unless the item or account has a payment block, the payment program is responsible for collecting these payments.

Dunning Levels for Line Items

Bar chart illustrating escalating urgency levels for overdue items, with Level 4 highlighted to emphasize its critical importance compared to lower levels.

Each item to be dunned is assigned a dunning level according to the number of days the item is in arrears. Each dunning procedure contains up to nine dunning levels.

The wording of the dunning notice is usually influenced by the dunning level. The higher the dunning level, the stricter the message in the dunning text.

For invoice-related credit memos, the system uses the dunning level of the invoice. The dunning level can only be raised by one from one dunning level to another. This means you cannot skip any dunning levels.

When setting up a dunning procedure, the number of days in arrears is taken as the default on the Dunning Levels screen. The Line item grace periods value is proposed as the first dunning level. For the rest of the dunning levels, the system adds the Dunning interval in days value to the number of days the previous dunning level is in arrears.

Hint

You can overwrite these default values, but it is not recommended.

Dunning procedures with only one dunning level are referred to as payment reminders. These procedures are used for important customers and public corporations. By using these procedures, you can ensure these customers only receive a payment reminder.

Dunning Keys

Illustration emphasizing progressive barriers or checkpoints in reaching higher levels, symbolized by stop signs atop numbered steps, suggesting caution or critical evaluation.

By assigning dunning keys to certain items, you can prevent those items from exceeding a certain dunning level.

Minimum Amounts per Dunning Level

Visual representation of conditions for assigning dunning levels based on minimum amounts and percentages, highlighting decision logic for escalating or lowering dunning stages.

The total amount of all the items in an account with a certain dunning level must be greater than a defined minimum amount. The relationship between the total amount and the total open items must be greater than a minimum percentage.

If this is not the case, the system sets the items to a lower dunning level.​

Hint

Usually, the minimum amounts and percentages at higher dunning levels are greater than the minimum amounts and percentages at lower levels.

Minimum Number of Days in Arrears (Account)

Visualizing overdue timelines for items, highlighting grace periods and minimum days in arrears thresholds to track payment delays relative to due dates.

You can only dun the account if at least one item reaches the permitted minimum number of days in arrears for the account.

In the figure, the conditions for account dunning are as follows:

  • Item 1 is overdue and must be dunned, but the minimum number of days in arrears has not been reached.
  • Item 2 is overdue, but it is still within the grace period.
  • Item 3 is overdue and must be dunned, but the minimum number of days in arrears has not been reached.
  • Item 4 is overdue and the minimum number of days in arrears (account) has been reached.

This means that items 1, 3, and 4 are dunned. Item 2 is not dunned because it is still within the line item grace period.

The Dunning Level of an Account

Visual explanation of how the highest dunning level among multiple documents determines the dunning level for a customer account, guiding correspondence and payment reminders.

The account gets the highest dunning level out of all the items to be dunned. If all the items are dunned with one dunning notice, the system words the dunning text according to the highest dunning level.

The dunning levels are not entered in the items or the accounts yet. This happens later on when the system prints the dunning notices. However, the system has already determined the dunning levels.

The Dunning Requirements

Illustration explaining dunning processes with progression levels, emphasizing decision points for updates or consistent notifications, culminating in a highlighted final stage.

After the dunning data is determined, the system checks whether the dunning process is necessary. Normally, it is not necessary to send a dunning notice if the dunning data has not changed since the last dunning run.

The system only duns an account if it fulfills one of the following conditions:

  • The dunning data has changed since the last dunning run.
  • The Always dunning notice? indicator is selected for the dunning level. This option is usually selected for the last dunning level and for payment reminders (dunning procedures that comprise only one dunning level).

The Legal Dunning Procedure

Accounts in a legal dunning procedure are subject to a different rule.

If the start date of the legal dunning procedure is entered in the account master data, the account is always dunned as long as the account fulfills one of the following conditions:

  • There have been postings made since the last dunning run.
  • The Always Dun in Legal Dunning Procedure indicator is selected.

Hint

The system does not send any dunning notices to a customer with a legal dunning procedure, even if the dunning data changed. It does not make any sense to send a dunning letter to a customer who has not responded to any previous dunning notices. If the system duns an account according to one of the criteria, it prints an internal note on a special form and sends the note to the legal department. The Always Dun in Legal Dunning Procedure indicator must be selected to prevent any open items posted before the start of the legal dunning procedure from being overlooked.

Dunning Proposal Edit

The Dunning Proposal Editing Process

Illustration of a dunning process workflow, highlighting account organization, parameter management, scheduling steps, and generated notices for financial follow-up.

After the system creates the dunning proposal, a clerk can edit it.

You can print the following lists to support the clerk’s work:

  • Dunning statistics
  • Dunning list
  • Blocked accounts
  • Blocked line items
  • Dunning history

You can display a sample printout on the screen. The system saves the changes to the dunning proposal.

Note

If you are not going to print the dunning proposal, you have to delete it. Otherwise, it blocks the items you selected for processing in other dunning runs.

Editing the Dunning Data

Visual representation of a process for editing dunning data, highlighting connections between account overview, items, dunning proposals, customer records, and correspondence.

The clerk can perform the following actions:

  • Block an account in the current dunning proposal or remove the dunning block.
  • Block a line item in the current dunning proposal or remove the dunning block.
  • Lower the dunning level of an item in the current dunning proposal.
  • Change the dunning and correspondence data of an account in the master record. This change does not apply to the current dunning run, you need to delete and restart the dunning run for the changes to take effect.
  • Change a document. This change does not apply to the current dunning run, you need to delete and restart the dunning run for the changes to take effect.

Hint

Only changes in the dunning proposal apply to the current dunning run.

You can raise or lower the dunning level as needed in the master data and documents.

Execute a Dunning Run

Edit a Dunning Proposal List

Dunning Notice Creation

Illustration of a process flow for generating and printing dunning notices, emphasizing key stages like scheduling, data validation, and producing related documents for accounts.

The last step in the dunning process involves printing the dunning notices.

The print program for the dunning procedure performs the following:

  • Groups items to be dunned with a dunning notice according to various rules.
  • Generates a dunning notice for each group.
  • Enters the dunning date and dunning level in the list of dunned items and accounts.

The system prints dunning notices in a sequence defined by sort criteria.

If you need to send dunning notices to one-time customers, only update the dunning data for relevant items. For information about undoing changes to dunning data in accounts and documents, see SAP Note 6591.

Grouping Items in the Dunning Notices

Visual representation of organizing overdue items from documents into a consolidated dunning letter for efficient follow-up and debt management.

Items to be dunned can be grouped together in dunning notices if they have the same company code, dunning area, and account.

The system groups the items of a one-time account in a single dunning notice if they have the same address.

Special Groupings

Grouping Items

  • Dunning by dunning level
  • Grouping key
  • Decentralized processing

You can group items by the following criteria:

  • Dunning by dunning level:

    In the company-code-specific settings for the dunning program, you can choose whether to print a separate dunning notice for each dunning level. In this case, the system selects the text for the dunning notice according to the dunning levels of the grouped items.

  • Grouping key:

    You can enter a grouping key in the customer or vendor account to group items that have the same values in the fields assigned to the grouping key in dunning notices. You can use the fields in the index tables for the open items BSID (customers) and BSIK (vendors).

  • Local processing:

    If a customer has a head office with several branch offices, the system posts items to the central account. As a result, the head office usually receives one dunning notice with all the items due from its branch offices. If Local Processing is selected in the branch accounts, meaning the dunning is processed locally, the system sends the notices to the branch offices.

Dunning Notice for Each Group

Illustration of cross-company code dunning process, showing collaboration among business entities to streamline customer communication and financial reconciliation.

You can use cross-company-code dunning to combine overdue items from different company codes in one dunning run. The overdue items from one customer in separate company codes are dunned with a single dunning notice. This means you do not have to send the customer a separate dunning notice for each company code.

Note

The system groups the overdue items according to predefined rules (dunning levels, dunning areas, or dunning grouping) and assigns them to one or more dunning notices.

If you want to dun separate company codes at the same time, you have to assign the relevant company codes to a shared dunning company code. The system uses the dunning procedure assigned to the account in the dunning company code. The system checks the dunning frequency and dunning blocks individually, from each separate company code.

Note

If a date for the legal dunning procedure for an account has been specified in the dunning company code, this also affects the dependent company codes.

Dunning Notices

You can print dunning notices with an attached payment form for bank transfer (Germany) or ESR payments (Switzerland). The customer can use this payment form to pay the dunned amount.

You can attach the payment form to the dunning notice or print it on a separate page. This means you have to change the dunning notice form so that it contains a separate window for the payment form, or you have to create a separate form for the additional page.

The dunning notice must only contain items with the company code currency.

The payment program can create a payment advice note containing the items in the dunning notice. When the customer pays the dunned amount, you can use this advice note to assign the incoming payment to the relevant items.

The payment advice number has 10 digits and starts with 08. You have to define the payment advice type 08 in the configuration settings.

You can print the payment advice number on the dunning notice and the payment form (for example, in the Reference field).

Print a Dunning Notice

Summary

  • Modify dunning program parameters to select accounts and documents.
  • Execute dunning run, edit proposal, and print dunning notices.
  • Dunning run checks accounts, line items, and dunning levels.
  • Dunning notices group items by company code, dunning area, and account.